Rejected a request to open a socket due to incorrect socket family.
This is an internal socket library issue. Please try the following: check protocol and interface configuration, restart the protocol, reboot the system. If the event still occurs then contact technical support with the output of "show tech".
Error
Invalid socket family %p3% on open socket request. Must be IPv4 or IPv6. Application socket handle = %p1% Socket type = %p2% Socket protocol = %p4%
| Name | Type |
|---|---|
| p1 | uInt32 |
| p2 | xInt32 |
| p3 | xInt32 |
| p4 | xInt32 |